Creality Falcon2 22W laser engraver, innovations for all great ideas. With features like triple monitoring system, new integrated air assist and offline dynamic preview the Falcon 2 offers a safer, smarter, and stronger use.
Highlights:
- Thicker Cutting with Stronger Power
- 25000mm/min Fast for Higher Productivity
- Groundbreaking Integrated Air Assist
- Magical Colorful Engraving
More Power Than Ever
Four 6-watt diodes are used to create the powerful laser. These are bundled using FAC technology. FAC stands for Fast-Axis Collimation, i.e., bundling the different light sources aligned parallel to each other onto a single point by means of a converging lens. The compressed laser diodes increase the power to 22W which can cut 15mm wood with one pass.
25000mm/min Fast for Higher Productivity
The Falcon 2 allows you to create more in less time thanks to its incredible speed. The engraving speed for Falcon 2 is 25000mm/min, increasing the productivity for you and your project.
Groundbreaking Integrated Air Assist
Unlike its predecessors, the Falcon 2 is equipped with an integrated air assist – no need to buy and install accessories. manually adjust the air assist steplessly through the knob, or it can automatically adjust the airflow through LightBurn, to remove smoke and protect the laser lens, bringing a cleaner result.
Triple Monitoring Systems
The processing of workpieces with a strong laser must of course take place under certain safety precautions. The Falcon 2 engraving machine offers three technologies for this.
Airflow Monitoring: The airflow monitor can remind the user whether the airflow is sufficient.
Lens Monitoring: The built-in lens contamination monitoring system triggers an alarm when the lens is dirty to a certain degree to prevent the lens from being destroyed or producing unclean cuts or engravings.
Flame Monitoring: When a flame is detected, the indicator will flash red with an alarm and the machine will stop immediately.
Five Safety Protections
- 1. Bidirectional Limit Switch: If the laser head hits the boundary, the machine will stop automatically and a buzzer will sound an alarm.
- 2. Active Stop Function: The machine will stop working in case of accidental tilt, flip or drop, with buzzer and indicator sending alert.
- 3. Security Lock Design: Professional use only.
- 4. Emergency Stop Button: If an emergency occurs during operation, you can also manually stop the machine immediately.
- 5. Laser Protective Cover: Made of high efficiency colored filter glass material, the protective cover around the laser head will effectively prevent the laser from dazzling the eyes.
Application of the Falcon 2
The Falcon 2 engraving and cutting machine can be used for a wide variety of creative projects. When creating puzzles, wooden decorations, mechanical or motorized creations and much more, the device can cut precisely and quickly.
Engraving can be done on a variety of materials including wood, acrylic, leather, tile, glass and metal. From the name tag on the door to the dog tag to furniture, a lot can be designed and embellished. Pictures burned onto wood or lasered into acrylic are also impressive and can be given as gifts on various occasions.
Extensive Compatibility
Compatible with a variety of systems, including Windows and macOS systems, and software such as LaserGRBL and LightBurn.
Add Some Colors to Your Works, and Your Life
When the stainless steel is heated by the super powerful laser beam, the metal surface will physically react and produce hundreds of colors, bringing your works to life.
Take the Experience Further
Silicone Pads: Can be fine-tuned manually to suit uneven tables.
Adjustable Risers: Multi-segment equal-length risers to increase the height, for engraving skateboards, basketballs and other taller objects.
Integrated Cable Storage: Keep it secure and well-organized.
Creality Falcon2 22W laser engraver, innovations for all great ideas. With features like triple monitoring system, new integrated air assist and offline dynamic preview the Falcon 2 offers a safer, smarter, and stronger use.
Highlights:
- Thicker Cutting with Stronger Power
- 25000mm/min Fast for Higher Productivity
- Groundbreaking Integrated Air Assist
- Magical Colorful Engraving
More Power Than Ever
Four 6-watt diodes are used to create the powerful laser. These are bundled using FAC technology. FAC stands for Fast-Axis Collimation, i.e., bundling the different light sources aligned parallel to each other onto a single point by means of a converging lens. The compressed laser diodes increase the power to 22W which can cut 15mm wood with one pass.
25000mm/min Fast for Higher Productivity
The Falcon 2 allows you to create more in less time thanks to its incredible speed. The engraving speed for Falcon 2 is 25000mm/min, increasing the productivity for you and your project.
Groundbreaking Integrated Air Assist
Unlike its predecessors, the Falcon 2 is equipped with an integrated air assist – no need to buy and install accessories. manually adjust the air assist steplessly through the knob, or it can automatically adjust the airflow through LightBurn, to remove smoke and protect the laser lens, bringing a cleaner result.
Triple Monitoring Systems
The processing of workpieces with a strong laser must of course take place under certain safety precautions. The Falcon 2 engraving machine offers three technologies for this.
Airflow Monitoring: The airflow monitor can remind the user whether the airflow is sufficient.
Lens Monitoring: The built-in lens contamination monitoring system triggers an alarm when the lens is dirty to a certain degree to prevent the lens from being destroyed or producing unclean cuts or engravings.
Flame Monitoring: When a flame is detected, the indicator will flash red with an alarm and the machine will stop immediately.
Five Safety Protections
- 1. Bidirectional Limit Switch: If the laser head hits the boundary, the machine will stop automatically and a buzzer will sound an alarm.
- 2. Active Stop Function: The machine will stop working in case of accidental tilt, flip or drop, with buzzer and indicator sending alert.
- 3. Security Lock Design: Professional use only.
- 4. Emergency Stop Button: If an emergency occurs during operation, you can also manually stop the machine immediately.
- 5. Laser Protective Cover: Made of high efficiency colored filter glass material, the protective cover around the laser head will effectively prevent the laser from dazzling the eyes.
Application of the Falcon 2
The Falcon 2 engraving and cutting machine can be used for a wide variety of creative projects. When creating puzzles, wooden decorations, mechanical or motorized creations and much more, the device can cut precisely and quickly.
Engraving can be done on a variety of materials including wood, acrylic, leather, tile, glass and metal. From the name tag on the door to the dog tag to furniture, a lot can be designed and embellished. Pictures burned onto wood or lasered into acrylic are also impressive and can be given as gifts on various occasions.
Extensive Compatibility
Compatible with a variety of systems, including Windows and macOS systems, and software such as LaserGRBL and LightBurn.
Add Some Colors to Your Works, and Your Life
When the stainless steel is heated by the super powerful laser beam, the metal surface will physically react and produce hundreds of colors, bringing your works to life.
Take the Experience Further
Silicone Pads: Can be fine-tuned manually to suit uneven tables.
Adjustable Risers: Multi-segment equal-length risers to increase the height, for engraving skateboards, basketballs and other taller objects.
Integrated Cable Storage: Keep it secure and well-organized.
