Motion Sensor Detector Module

45 kr

HC-SR501 IR Pyroelectric Infrared IR PIR Motion Sensor Detector Module

Tilgjengelighet 9 på lager

Kategori:

 
New HC-SR501 Infrared PIR Motion Sensor Module for Arduino Raspberry pi HCSR501 HC-SR501 Adjust IR Pyroelectric Infrared PIR Motion Sensor Detector Module Description: It is great for microcontrollers such as arduino for funduin o and many more including the rasberry pi! It is a HC–SR501 Sensor Module With an operating voltage of 5v to 20v Operating voltage. It has a high value of 3.3 volts and a low of 0 (it is either on or off). It’s delay time can be adjusted from 5 to 200seconds as well as the sensing range from 3meter to 7meters. The entire sensor with the board is 32mm by 24mm (standard pir motion sensor). The sensor either gives off a 3.3volt high value when motion is detected and then resumes or continues to give off a 0 voltage when no motion is detected. If you use an arduino or other micro controllers you can use the 3.3 volt out to power the sensor or use the 5volt power pin (vcc) to power the sensor. Either one will work.
With an operating voltage of 5v to 20v Operating voltage. It has a high value of 3.3 volts and a low of 0 (it is either on or off). It’s delay time can be adjusted from 5 to 200seconds as well as the sensing range from 3meter to 7meters. The entire sensor with the board is 32mm by 24mm (standard pir motion sensor). The sensor either gives off a 3.3volt high value when motion is detected and then resumes or continues to give off a 0 voltage when no motion is detected. If you use an arduino or other micro controllers you can use the 3.3 volt out to power the sensor or use the 5volt power pin (vcc) to power the sensor. Either one will work.
Working voltage range: DC 4.5-20V Static current: <50ua high=»» level=»» output:=»» 3=»» v=»» low=»» 0v=»» trigger=»» mode:=»» l=»» unrepeatable=»» h=»» repeated=»» default=»» repeating=»» delay=»» time:=»» 0=»» 5-200s=»» adjustable=»» can=»» be=»» produced=»» range=»» 1=»» seconds=»» -=»» a=»» few=»» minutes=»» blocking=»» 2=»» 5s=»» the=»» tens=»» of=»» size:=»» 32mm=»» 25mm=»» circuit=»» board=»» induction=»» angle:=»» 100=»» degree=»» cone=»» angle=»» working=»» temperature:=»» -15-=»» 70=»» degrees=»» lens=»» diameter:=»» 23mm=»» span=»» id=»mce_marker» data-mce-type=»bookmark»>È
 

Skroll til toppen